X350R Tractor with 42-inch Rear-Discharge Deck (2016) for sale at Brazos Valley Equipment Co.. Your source for new and used equipment in Waco, Hillsboro, Cleburne, and Ennis Texas

CroppedImage660350-JohnDeere-X350R-42inch.jpg

X350R Tractor with 42-inch Rear-Discharge Deck (2016)

Select Series X300

  • Get a quote
    • Fields with asterisks* and highlighted red are required.

      Please email our helpful staff with any questions or comments using the contact form.

  • Send to a friend
    • Fields with asterisks* and highlighted red are required.

      Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.

  • 18.5-hp (13.8 kW)* V-twin, full-pressure lubricated, air-cooled
  • Rear-discharge, rear-collect deck cuts clean
  • Rear hopper has large capacity and is easy to empty
  • Best-in-class 4 year/300 hour limited warranty
Manufacturer John Deere
Model X350R-42R (2016)
Engine  
Power  18.5 hp 
 13.8 kW 
Displacement  36.8 cu in. 
 603 cc 
Manufacturer/model  FS600V  
Type  Overhead valve, full-pressure lube, oil filter  
Cylinders  V-twin, cast-iron liners  
Governor  Mechanical  
Choke/speed control  Separate levers, automatic choke return  
Cooling method  Air  
Air cleaner  Dry, replaceable with foam precleaner  
Oil drain  No tools  
Fuel system  
Type  Gasoline  
Fuel delivery  Pulse pump, carburetor  
Fuel gauge  Low fuel indicator  
Fuel tank location  Rear  
Fuel fill opening  On left fender, 3 in. 
 7.6 cm 
Fuel tank capacity  2 U.S. gal. 
 7.6 L 
Electrical system  
Battery  12 V 
 340 CCA 
Charging system  Flywheel alternator, regulated, 15 amp 
Engine starter  Bendix  
Hourmeter  Yes  
Headlights  Two standard, incandescent, 27 W 
Taillights or reflector  No  
Backup lights  No  
Rear work lights  No  
12-V outlet  Optional  
Transaxle  
Type  K46 hydrostatic integrated with transaxle  
Control  Twin Touch™ pedals  
Cruise control  Yes, button on dash  
Oil cooler  Fins and fan on transaxle  
Oil filter  Internal, not replaceable  
Differential lock  No  
Forward speed  0-5.3 mph 
 0-8.5 km/h 
Reverse speed  0-4 mph 
 0-6.4 km/h 
Brakes  Internal wet disc  
Chassis  
Frame  Welded heavy-duty  
Primer/paint  E-coat/powder  
Weight bracket  Optional front  
Receiver hitch  No  
Front axle  Cast iron front axle, front wheel ball bearings  
Spindle bushings  No  
Front tires  15x6-6  
Rear tires  20x10-8  
Hood material  Molded-in color hood material reduces sound, will not rust or dent  
Fender deck material  Stamped steel  
Floor mats  Sure-grip rubber  
Storage  On fender and under seat  
Service interval decal  Yes  
Fender handles/grips  No  
Cup holder  Yes  
Equipment mounting  Yes, front  
Steering  
Type  Manual, sector and pinion  
All-wheel steer  Not available on this model  
Steering wheel  Large, 14 in. 
 35.6 cm 
Tilt steering wheel  No  
Turning radius  16.5 in. 
 42 cm 
Uncut circle radius  Right, 23 in. 
 58.4 cm 
 Left 28 in. 
 71.1 cm 
Seat  
Type  Open-back design with grasp  
Seat back height  15 in. 
 38.1 cm 
Armrests  No  
Fore-aft adjustment  While seated, slide rail, 14-position, 7 in. 
 17.8 cm 
Seat suspension  Tilt, two coil springs, three-position no-tools adjustment for operator weight  
Lift system  
Type  Foot pedal with non-adjustable spring assist, optional adjustable spring assist kit available (required for snow blower use)  
Hydraulic outlets  No  
Mower cut height  13 positions, 1-4 in. 
 2.5-9.5 cm 
Cut height increments  0.25 in. 
 0.64 cm 
Preset cut height  Yes  
Mower deck  
Type  Rear discharge, rear collect  
Cutting width  42 in. 
 107 cm 
Construction  Stamped steel deck shell  
Mower deck material  11 gauge 
 0.120 in. 
 3 mm 
Mower wash port  Yes  
Mower drive system  Electric power take-off (PTO) clutch, in-line belt  
Mower wheels  Three  
Mower wheel adjustment  Four-position, tool required  
Mower level adjustment  Exact Adjust ports and onboard deck-leveling gauge  
Mower attachability  
Type  Slide under tractor  
Front draft arms  Attached with spring pins at two points  
Rear draft arms  Two pins and spring clips  
Mower wheels rotate  No  
Drive system  Dual belt  
Safety  
Meets ANSI standard  Yes  
Meets OPEI standard  Yes  
Backup protection  Reverse Implement Option (RIO)  
Safety video  Yes  
Buyer's notes  
Notes  One-piece hood for easy service access, molded-in color hood material reduces sound and will not rust or dent  
 Durable E-coat primer and powder-paint finish  
Warranty  4 year/300 hour bumper-to-bumper* (*Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.)  
Optional equipment  
Mowers  Rear discharge, rear collect (standard), 42 in. 
 107 cm 
Rear bagger  Rear hopper, 8.5 bu 
 300 L 
Powered material collection  ---  
Mulching system  Yes  
Front thatcher  38, 46, 54 in. 
 96.5, 116.8, 137.2 cm 
Front blade  44 in. 
 111.8 cm 
Mid-mount blade  ---  
Snow blower  Two-stage, 44 in. 
 111.8 cm 
Rotary broom  ---  
Rotary tiller  ---  
Sleeve hitch  ---  
3-point hitch  ---  
Rear power take-off (PTO)  ---  
Plow, moldboard  ---  
Box scraper  ---  
Cultivator  ---  
Rear blade  ---  
Disk harrow  ---  
Landscape rake  ---  
Sprayer  Tow-behind, 15 U.S. gal. 
 56.8 L 
 Tow-behind, 25 U.S. gal. 
 94.6 L 
Spreader  Tow-behind, 125 lb 
 57.7 kg 
 Tow-behind, 175 lb 
 79.4 kg 
Front bumper  Styled bumper option  
Brush guard  Yes  
Weather protection  ---  
Sun canopy  ---  
Rear receiver hitch  ---  
Bucket holder  ---  
Grass striping  Lawn striping kit  
Tractor shovel  40 in. 
 101.6 cm 
Front loader  ---  
Other equipment  ---  
Tow-behind tools  16  
Dimensions  
Height  47 in. 
 120 cm 
Overall length  99 in. 
 251.4 cm 
Wheelbase  49.4 in. 
 125.5 cm 
Width with mower  43.8 in. 
 111 cm 
Width with mower (deflector raised for storage)  ---  
Width without mower  38 in. 
 96.5 cm 
Weight  Mower, no fuel, 646 lb 
 293 kg 
Date collected  16-May-2016