648R for sale at Brazos Valley Equipment Co.. Your source for new and used equipment in Waco, Hillsboro, Cleburne, and Ennis Texas

CroppedImage660350-648r-large.jpg

648R

600 R Series

  • Get a quote
    • Fields with asterisks* and highlighted red are required.

      Please email our helpful staff with any questions or comments using the contact form.

  • Send to a friend
    • Fields with asterisks* and highlighted red are required.

      Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.

The QuikTrak 648R has a commercial-quality V-twin air-cooled engine coupled with an easy-to-use hydrostatic transmission that is a real time-saver, especially for new operators. Productivity gains also result from quicker loading and unloading between job sites, shorter interruptions for debris collection while mowing, and reduced operator fatigue.

Manufacturer John Deere
Model 648R (2016)
Engine  
Manufacturer  ---  
Model no.  FX691V  
Horsepower (gross)  At 3600 rpm 22 hp 
   16.4 kW 
Displacement  44.3 cu in. 
   726 cc 
Cylinders  Two, V-twin  
Crankcase capacity  W/filter 2.2 U.S. qt 
   2.1 L 
Oil filter  Full flow, replaceable  
Lubrication  Full pressure  
Cooling  Forced air  
Air cleaner  Dry type, dual stage with unloader valve  
Pre-cleaner  ---  
Fuel system  
Fuel type  Gasoline  
Fuel consumption  ---  
Fuel tank capacity  5.6 U.S. gal. 
   21.2 L 
Fuel tank switch/shut-off valve  Yes  
Electrical system  
Charge system  At 3600 rpm 20 amp 
Battery voltage  12 V 
Cold cranking amp  ---  
Hour meter  Yes  
Operator presence starting system  Yes  
Drivetrain  
Hydraulic pumps  Hydro-Gear with fans 0.73 cu in. 
   12 cc 
Wheel motors  Hydro-Gear 15 cu in. 
   246 cc 
Travel speed    
Forward  0-9.6 mph 
   0-15.4 km/h 
Reverse  0-5.5 mph 
   0-8.9 km/h 
Speed and direction control  Twin hand-controlled levers  
Hydraulic capacity  W/filter-wet, dry 2.9, 5 qt 
   2.7, 4.7 L 
Hydraulic oil cooler  ---  
Filter  Spin-on replaceable  
Tires  
Drive tires  20x10-8 Turf Master  
Rear tires  ---  
Load rating  4 PR  
Brakes  
Dynamic braking  Dual hand-controlled levers  
Park brake  Tire engagement  
Park brake actuation  Hand lever  
PTO  
Type  Electro-Magnetic w/brake 200 lb-ft 
   271 Nm 
Drive  Dual B-section V-belt  
Mower decks  
Available widths  48 in. 
   122 cm 
Deck construction  Fabricated steel, floating mount system  
Deck thickness  7 gauge, 0.177 in. 
   4.6 mm 
Discharge  Side  
Height-of-cut range  1.5-5 in. 
   3.8-12.7 cm 
Increments  0.25 in. 
   6.4 mm 
Cutting width  48 in. 
   122 cm 
Blades  
Length  ---  
Thickness  ---  
Tip speed  18,900 fpm 
   96 m/s 
Number  Three  
Wheels  
Caster wheel type  No-flat semi-pneumatic w/sealed bearings  
Caster wheel size  13x6.5-6  
Front anti-scalp rollers  ---  
Rear anti-scalp rollers  ---  
Dimensions  
Length  66 in. 
   167.6 cm 
Width  W/deflector down 62 in. 
   157.4 cm 
Height  47 in. 
   119 cm 
Weight  910 lb 
   412.8 kg