636M for sale at Brazos Valley Equipment Co.. Your source for new and used equipment in Waco, Hillsboro, Cleburne, and Ennis Texas

CroppedImage660350-636m-large.jpg

636M

600 M Series

  • Get a quote
    • Fields with asterisks* and highlighted red are required.

      Please email our helpful staff with any questions or comments using the contact form.

  • Send to a friend
    • Fields with asterisks* and highlighted red are required.

      Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.

  • Compact design for easy hauling
  • Hydrostatic drive system
  • Commercial-quality engine
  • Easy to maintain
Manufacturer John Deere
Model 636M (2016)
Engine  
Manufacturer  ---  
Model no.  FS600V  
Horsepower (gross)  At 3600 rpm 18.5 hp 
   13.8 kW 
Displacement  36.8 cu in. 
   603 cc 
Cylinders  Two, V-twin  
Crankcase capacity  W/filter 2.2 qt 
   2.1 L 
Oil filter  Full flow, replaceable  
Lubrication  Full pressure  
Cooling  Forced air  
Air cleaner  Dry type, dual stage  
Pre-cleaner  ---  
Fuel system  
Fuel type  Gasoline  
Fuel consumption  ---  
Fuel tank capacity  5.5 U.S. gal. 
   20.8 L 
Fuel tank switch/shut-off valve  Yes  
Electrical system  
Charge system  At 3600 rpm 15 amp 
Battery voltage  12 V 
Cold cranking amp  300 amp 
Hour meter  Digital  
Operator presence starting system  Yes  
Drivetrain  
Hydraulic pumps  Hydro-Gear 0.61 cu in. 
   10 cc 
Wheel motors  Hydro-Gear HGM-P 12 cu in. 
   196 cc 
Travel speed    
Forward  Infinite 0-8.2 mph 
   Infinite 0-13.2 km/h 
Reverse  Infinite 0-3.5 mph 
   Infinite 0-5.6 km/h 
Speed and direction control  Twin hand-controlled levers  
Hydraulic capacity  With filter, dry 5 qt 
   4.7 L 
Hydraulic oil cooler  Yes  
Filter  Spin-on replaceable  
Tires  
Drive tires  18x8.5-10 turf  
Rear tires  ---  
Load rating  4 PR  
Brakes  
Dynamic braking  Dual hand-controlled levers  
Park brake  Tire engagement  
Park brake actuation  Hand lever  
PTO  
Type  Electro-magnetic w/brake 125 lb-ft 
   169 Nm 
Drive  Dual B-section V-belt with Kevlar® cord  
Mower decks  
Available widths  36 in. 
   91.4 cm 
Deck construction  Fabricated steel, floating mount system  
Deck thickness  7 gauge, 0.177 in. 
   4.6 mm 
Discharge  Side  
Height-of-cut range  1.25-5 in. 
   3.2-12.7 cm 
Increments  0.25 in. 
   6.4 mm 
Cutting width  36 in. 
   91 cm 
Blades  
Length  18 in. 
   45.7 cm 
Thickness  0.203 in. 
   5.16 mm 
Tip speed  18,900 fpm 
   5761 m/min 
Number  Two  
Wheels  
Caster wheel type  No-flat semi-pneumatic w/sealed bearings  
Caster wheel size  11x4-5  
Front anti-scalp rollers  ---  
Rear anti-scalp rollers  ---  
Dimensions  
Length  62 in. 
   157.5 cm 
Width  Deflector down 49.5 in. 
   125.7 cm 
Height  46 in. 
   117 cm 
Weight  With full fuel and oil 731 lb 
   332 kg