8370R for sale at Brazos Valley Equipment Co.. Your source for new and used equipment in Waco, Hillsboro, Cleburne, and Ennis Texas

CroppedImage660350-8370R.jpg

8370R

8R/8RT Series

  • Get a quote
    • Fields with asterisks* and highlighted red are required.

      Please email our helpful staff with any questions or comments using the contact form.

  • Send to a friend
    • Fields with asterisks* and highlighted red are required.

      Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.

  • 370 Engine hp
  • John Deere PowerTech™ 9.0L PSS
  • Choice of 16-speed PowerShift, e23™ PowerShift, or Infinitely Variable Transmission (IVT™)
  • MFWD, or Independent Link Suspension (ILS™)
Manufacturer John Deere
Model 8370R (MY2014)
Official Test  
Nebraska Test number TBD Nebraska Test
Engine  
Manufacturer John Deere
Engine family 9.0L: EJDXL09.0301
Aspiration Dual turbochargers, variable geometry turbo with fixed geometry turbo in series
Cylinders/Displacement, cu. in. (L) 6 cylinders/9.0 L
  549 cu in.
Cylinder Liners Wet
Fuel tank capacity, US Gal. (L) (Open; Cab) ---
Standard With G47/48 tires: 645 L
  170.4 U.S. gal.
  With G49 tires: 686 L
  181.2 U.S. gal.
Optional ---
Underhood muffler ---
Performance  
Advertised PTO hp (kW) @ Rated rpm At 2100 per SAE: 233 kW
  313 hp
Official PTO hp (kW) @ Rated rpm ---
@ Standard PTO @ Eng rpm ---
Maximum @ Eng rpm ---
Advertised Engine hp (kW) @ Rated speed AT 2100 per 97/68EC PS: 272 kW
  370 hp
Max Unballast Drwbr hp (kW) @ Eng rpm ---
Maximum Torque (PTO) @ rpm, lb-ft (Nm) ---
Max Torque Rise (80% rtd spd) @ Eng rpm ---
Maximum Torque Rise % (PTO) @ Eng rpm ---
Fuel Use, U.S. gal./hr & hp hr/gal. at:  
PTO @ Rated Eng rpm ---
Standard PTO Speed @ Eng speed ---
Maximum PTO Power @ Eng rpm ---
Maximum Engine Power @ Eng rpm ---
Max Unballasted Drawbar Power @ Eng rpm ---
75% Load, Full Engine rpm (Unballasted) ---
75% Load @ Reduced rpm (Unballasted) ---
Transmission  
Std. Transmission; Forward/Reverse IVT
Opt. Transmission; Forward/Reverse IVT
Reverser Left-hand or Right-hand
On-the-Go Shifting (Yes/No/Partial) Yes
Clutch; Wet/Dry Wet
Creeper IVT
Power Take-Off (PTO)  
Standard 45 mm
  1.75 in.
  20 spline, 1000 rpm
Optional Electronically shiftable in cab: 45 mm
  1.75 in.
  20 spline, 1000 rpm
  with 1000/1000E rpm gearcase
PTO Speeds @ Engine rpm At 2000 rpm: 1000 rpm
PTO Actuation Electrohydraulic
Hydraulics  
Type Closed-center, pressure/flow compensated
Pump Rated Output, GPM (L/min.) ---
Standard 227.1 L/min
  60 gpm
Optional 321 L/min
  85 gpm
Rated Flow @ One SCV, GPM (L/min.) Coupler: 12.7 mm
  0.5 in.
  96 L/min
  25 gpm
  132 L/min
  35 gpm
  Ccoupler: 19.1 mm
  0.75 in.
  153 L/min
  40.5 gpm
Max Output @ SCV Couplers, GPM (L/min.) ---
Maximum Operating Pressure, psi (kPa) 20,400 (+ or - 300) kPa
  2958 psi
Maximum Hydraulic Power, hp (kW) ---
Hitch Draft Control Load Sense Type Electronic
Remote Control Valves Available Standard: four
  Optional: five or six
  2 Front SCV option
Hitch Category (SAE Designation) Standard: Cat 3/3N
  Optional: Cat 4N/3
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt. ---
OECD ---
Standard Cat 4N/3: 8,482 kg
  Cat 4N/3: 18,700 lb
Optional Cat 3/3N: 6,396 kg
  Cat 3/3N: 14,100 lb
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt. (SAE) ---
Standard ---
Optional ---
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt. (ASAE) ---
Standard ---
Optional ---
Sensing type Electrohydraulic
Joystick SCV control Electrohydraulic optional
Final Drive  
Type Inboard planetary
Differential controls Electrohydraulic
Availability Yes
Front Yes
Front & Rear Yes
Engage On-the-Go Rear Differential Lock Yes
Axle Type Bar axle, rack and pinion
Brakes, Type and Control Hydraulic wet disc
Operator Station  
Rollover Protective Structure, OOS ---
Rigid - Foldable - Telescopic ---
Platform - Flat/Straddle ---
Gearshift Location - Console/Floor CommandARM
Cab ---
Doors Left hand
Platform - Flat/Straddle Flat
dB(A) Rating ---
Seat Suspension System Standard: Air
  Optional: Active Seat
  Optional: Cab suspension with Air Seat
2WD Dimensions  
Wheelbase, in. (mm) ---
Front Tread Range, in. (mm) ---
Rear Tread Range, in. (mm) ---
Minimum Rear Tread Setting, in. (mm) ---
Front Axle Clearance, in. (mm) ---
Turning Radius w/Brakes, ft (m) ---
Turning Radius w/o Brakes, ft (m) ---
Unballasted Operating Weight, lb (kg) ---
Approx. Ship Wgt, lb (kg) Open; Cab ---
MFWD Dimensions  
Wheelbase, in. (mm) MFWD: 3080 mm
  121.3 in.
  ILS: 3050 mm
  120.1 in.
Front Tread Range, in. (mm) 1500 MFWD/ILS: 1524-3657 mm
  60-144 in.
Front Axle Clearance, in. (mm) MFWD: 686 mm
  27 in.
  ILS: 590 mm
  23.2 in.
Turning Radius w/Brakes, ft (m) ---
Turning Radius w/o Brakes, ft (m) ---
Limited Slip Differential Hydraulic lock differential
Unballasted Operating Weight, lb (kg) ---
Approx. Ship Wgt, lb (kg) Open; Cab ILS/IVT with: inner weights: 625 kg
  1378 lb
  Front weight support/Cat4 hitch with QC/Fuel 113.6 L
  30 gal.
  480/80R50 duals/420/85R34 front duals
  14,828 kg
  32,691 lb
4WD Dimensions  
Wheelbase, in. (mm) ---
Wheel Tread, Min. to Max. in. (mm) ---
Turning Radius w/o Brakes, ft (m) ---
Nebraska Test Unballasted w/Duals, lb (kg) ---
Unballasted Weight, lb (kg) ---
Standard Tires  
2WD ---
Front ---
Rear ---
MFWD ---
Front 420/85R34
Rear 480/80R50
4WD ---
Track widths ---
Miscellaneous  
Country of Manufacture Waterloo, IA USA
Ballasting Restrictions, lb (kg) Refer to operator's manual
*Notes ---