7250R for sale at Brazos Valley Equipment Co.. Your source for new and used equipment in Waco, Hillsboro, Cleburne, and Ennis Texas

CroppedImage660350-7250R.jpg

7250R

7R Series

  • Get a quote
    • Fields with asterisks* and highlighted red are required.

      Please email our helpful staff with any questions or comments using the contact form.

  • Send to a friend
    • Fields with asterisks* and highlighted red are required.

      Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.

  • 250 Engine hp
  • John Deere PowerTech™ 6.8L PSS
  • Choice of e23™ PowerShift, or Infinitely Variable Transmission (IVT™)
  • MFWD, or Triple Link Suspension Plus (TLS™)

Engine

Manufacturer John Deere
Engine family 6.8L: EJDXL06.8302
Aspiration Dual turbochargers, variable geometry turbo with fixed geometry turbo in series
Cylinders/Displacement, cu. in. (L) 6 / 6.8 L415 cu in.
Cylinder Liners Wet
Fuel tank capacity, US Gal. (L) (Open; Cab) ---
Standard e23 PST with G47/48 tires: 125 (475), with G49 tires 131 (497) IVT with G47/48 tires: 137 (520), with G49 tires 143 (543)
Optional ---
Underhood muffler ---

Performance

Advertised PTO hp (kW) @ Rated rpm 205 @ 2100 per SAE PTO hp152.9 kW
Official PTO hp (kW) @ Rated rpm ---
@ Standard PTO @ Eng rpm ---
Maximum @ Eng rpm ---
Advertised Engine hp (kW) @ Rated speed 250 @ 2100 per 97/68EC PS engine hp183.9 kW
Max Unballast Drwbr hp (kW) @ Eng rpm ---
Maximum Torque (PTO) @ rpm, lb-ft (Nm) ---
Max Torque Rise (80% rtd spd) @ Eng rpm ---
Maximum Torque Rise % (PTO) @ Eng rpm ---

Fuel Use, U.S. gal./hr & hp hr/gal. at:

PTO @ Rated Eng rpm ---
Standard PTO Speed @ Eng speed ---
Maximum PTO Power @ Eng rpm ---
Maximum Engine Power @ Eng rpm ---
Max Unballasted Drawbar Power @ Eng rpm ---
75% Load, Full Engine rpm (Unballasted) ---
75% Load @ Reduced rpm (Unballasted) ---

Transmission

Std. Transmission; Forward/Reverse e23 PST; 23/11
Opt. Transmission; Forward/Reverse IVT
Reverser Left-hand or Right-hand
On-the-Go Shifting (Yes/No/Partial) Yes
Clutch; Wet/Dry Wet
Creeper IVT

Power Take-Off (PTO)

Standard 1-3/4 in., 20-spline, 1,000-rpm
Optional 1-3/4-in., 20-spline, 1,000-rpm with 1-3/8 in. 540*/1000 rpm gearcase, shiftable at rear of tractor 1-3/4-in., 20-spline, 1,000-rpm with 1-3/8 in. 540E/1000/1000E rpm gearcase, Electronically shiftable in cab 1-3/4-in., 20-spline, 1,000-rpm with 1-3/8 in. 540/540E/1000 rpm gearcase, Electronically shiftable in cab
PTO Speeds @ Engine rpm 540/1000 PTO rpm @ 1950 engine rpm 540E/1000E PTO rpm @ 1750 engine rpm
PTO Actuation Electro-hydraulic

Hydraulics

Type Closed-center, pressure/flow compensated
Pump Rated Output, GPM (L/min.) ---
Standard 43 gpm162 L/min
Optional 59 gpm223.3 L/min
Rated Flow @ One SCV, GPM (L/min.) 33, 35 gpm126, 132 L/min
Max Output @ SCV Couplers, GPM (L/min.) ---
Maximum Operating Pressure, psi (kPa) 2958 psi20,400 + or- 300 kPa
Maximum Hydraulic Power, hp (kW) ---
Hitch Draft Control Load Sense Type Electronic
Remote Control Valves Available 3, 4 (Standard), 5, 6 3 Mid-mount (max. 9) option 2 Front SCV option
Hitch Category (SAE Designation) Cat 3/3N
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt. ---
OECD ---
Standard 15200 lb6895 kg
Optional 17300 lb7847 kg
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt. (SAE) ---
Standard ---
Optional ---
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt. (ASAE) ---
Standard ---
Optional ---
Sensing type Electro-hydraulic
Joystick SCV control Electro-hydraulic optional

Final Drive

Type Inboard planetary
Differential controls Electro-hydraulic
Availability Yes
Front Yes
Front & Rear Yes
Engage On-the-Go Rear Differential Lock Yes
Axle Type Bar axle, rack and pinion
Brakes, Type and Control Hydraulic wet disc with retractors

Operator Station

Rollover Protective Structure, OOS ---
Rigid - Foldable - Telescopic ---
Platform - Flat/Straddle ---
Gearshift Location - Console/Floor CommandARM
Cab ---
Doors LH
Platform - Flat/Straddle Flat
dB(A) Rating ---
Seat Suspension System Air std. Active Seat (optional) Cab suspension with Air Seat (optional)

2WD Dimensions

Wheelbase, in. (mm) ---
Front Tread Range, in. (mm) ---
Rear Tread Range, in. (mm) ---
Minimum Rear Tread Setting, in. (mm) ---
Front Axle Clearance, in. (mm) ---
Turning Radius w/Brakes, ft (m) ---
Turning Radius w/o Brakes, ft (m) ---
Unballasted Operating Weight, lb (kg) ---
Approx. Ship Wgt, lb (kg) Open; Cab ---

MFWD Dimensions

Wheelbase, in. (mm) 115.2 in.2925 mm
Front Tread Range, in. (mm) 60-88 in.1524-2235 mm
Front Axle Clearance, in. (mm) 19.5 1300 axle, G43 420/85R34 tires in.495 1300 axle, G43 420/85R34 tires mm
Turning Radius w/Brakes, ft (m) ---
Turning Radius w/o Brakes, ft (m) ---
Limited Slip Differential limited slip or hydraulic lock differential available
Unballasted Operating Weight, lb (kg) ---
Approx. Ship Wgt, lb (kg) Open; Cab 25738 (11674) TLS/e23/1-452 lbs inner weight/front weight support /Cat3 hitch with QC/shipping fuel, DEF/480/80R50 duals/380/80R38 fronts

4WD Dimensions

Wheelbase, in. (mm) ---
Wheel Tread, Min. to Max. in. (mm) ---
Turning Radius w/o Brakes, ft (m) ---
Nebraska Test Unballasted w/Duals, lb (kg) ---
Unballasted Weight, lb (kg) ---

Standard Tires

2WD ---
Front ---
Rear ---
MFWD ---
Front 420/85R34
Rear 480/80R50
4WD ---
Track widths ---

Miscellaneous

Country of Manufacture Waterloo, IA USA
Ballasting Restrictions, lb (kg) Refer to operator's manual