6215R for sale at Brazos Valley Equipment Co.. Your source for new and used equipment in Waco, Hillsboro, Cleburne, and Ennis Texas

CroppedImage660350-6215R.jpg

6215R

6R Series

  • Get a quote
    • Fields with asterisks* and highlighted red are required.

      Please email our helpful staff with any questions or comments using the contact form.

  • Send to a friend
    • Fields with asterisks* and highlighted red are required.

      Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.

  • Reliable John Deere 6.8L PowerTech™ Final Tier 4 engine
  • Standard 20 Speed AutoQuad PLUS™ transmission or available Direct Drive or Infinitely Variable Transmission
  • ComfortView™ cab for all day comfort

 

Manufacturer John Deere
Model 6215R FT4
Official Test  
Nebraska Test number  2106  
Engine  
Manufacturer  John Deere PowerTech PSS  
Engine family  ---  
Aspiration  Dual series turbocharger with fixed geometry first-stage, variable geometry second-stage air-to-air aftercooling and cooled exhaust gas recirculation  
Cylinders/Displacement, cu. in. (L)  6 / 6.8 L 
   6 / 415 cu in. 
Cylinder Liners  Wet sleeve  
Fuel tank capacity, US Gal. (L) (Open; Cab)  ---  
Standard  330 L 
   87.1 gal. 
Optional  ---  
Underhood muffler  Yes  
Performance  
Advertised PTO hp (kW) @ Rated rpm  131 @ 2100 kW 
   176 @ 2100 PTO hp 
Official PTO hp (kW) @ Rated rpm  135.02 @ 2102 kW 
   181.06 rpm 
@ Standard PTO @ Eng rpm  151.84 @ 1959 kW 
   203.63 rpm 
Maximum @ Eng rpm  153.41 @ 1800 kW 
   205.72 rpm 
Advertised Engine hp (kW) @ Rated speed  158 kW 
   215 engine hp 
Max Unballast Drwbr hp (kW) @ Eng rpm  129.67 kW 
   173.89 rpm 
Maximum Torque (PTO) @ rpm, lb-ft (Nm)  927 @ 1301 Nm 
   684 ft 
Max Torque Rise (80% rtd spd) @ Eng rpm  42 percent 
   @ 1681 rpm 
Maximum Torque Rise % (PTO) @ Eng rpm  51.20 percent 
Fuel Use, U.S. gal./hr & hp hr/gal. at:  
PTO @ Rated Eng rpm  17.27  
Standard PTO Speed @ Eng speed  17.97  
Maximum PTO Power @ Eng rpm  18.21  
Maximum Engine Power @ Eng rpm  13.6 percent 
   @ 1800 rpm 
Max Unballasted Drawbar Power @ Eng rpm  129.67 kW 
   173.89 rpm 
75% Load, Full Engine rpm (Unballasted)  102.05 kW 
   136.86 rpm 
75% Load @ Reduced rpm (Unballasted)  101.78 kW 
   136.49 rpm 
Transmission  
Std. Transmission; Forward/Reverse  20-speed AutoQuad PLUS ECO transmission 40 km/h 
   20-speed AutoQuad PLUS ECO transmission 25 mph 
Opt. Transmission; Forward/Reverse  16-speed PowrQuad PLUS transmission, 20-speed AutoQuad PLUS ECO transmission (50), John Deere Infinitely Variable Transmission (IVT) (0.050 to 42), or John Deere IVT (0.050 to 50), DirectDrive ECO transmission (40) 24X24 km/h 
   16-speed PowrQuad PLUS transmission, 20-speed AutoQuad PLUS ECO transmission (31), John Deere Infinitely Variable Transmission (IVT) (0.030 to 26), or John Deere IVT (0.030 to 31), DirectDrive ECO transmission (25) 24X24 mph 
Reverser  Left-hand base  
On-the-Go Shifting (Yes/No/Partial)  Yes  
Clutch; Wet/Dry  Wet  
Creeper  Included with IVT  
Power Take-Off (PTO)  
Standard  ---  
Optional  1-3/8-in. 540/540E/1000 reversible shaft; 1-3/4-in. 540/540E/1000 reversible shaft; 1-3/8-in. 540/1000/1000E reversible shaft; 1-3/4-in. 540E/1000/1000E reversible shaft  
PTO Speeds @ Engine rpm  1073 @ 2102 rpm 
PTO Actuation  Electrohydraulic  
Hydraulics  
Type  Closed-center, pressure/flow compensated  
Pump Rated Output, GPM (L/min.)  ---  
Standard  155 L/min 
   41 gpm 
Optional  N/A  
Rated Flow @ One SCV, GPM (L/min.)  122.7 L/min 
   32.4 gpm 
Max Output @ SCV Couplers, GPM (L/min.)  149.3 L/min 
   39.4 gpm 
Maximum Operating Pressure, psi (kPa)  20,000 kPa 
   2900 psi 
Maximum Hydraulic Power, hp (kW)  42.9 kW 
   57.5 hp 
Hitch Draft Control Load Sense Type  Electrohydraulic  
Remote Control Valves Available  3-450 Series Mechanical SCVs standard, 3 to 4 electrohydraulic SCVs; 2 or 4 mechanical SCVs are optional  
Hitch Category (SAE Designation)  Category 3/3N  
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt.  ---  
OECD  ---  
Standard  TBD - Nebraska Test  
Optional  N/A  
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt. (SAE)  ---  
Standard  N/A  
Optional  N/A  
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt. (ASAE)  ---  
Standard  N/A  
Optional  N/A  
Sensing type  Electronic lower link  
Joystick SCV control  Mechanical or electronic  
Final Drive  
Type  Inboard planetary three pinion  
Differential controls  Electrohydraulic  
Availability  ---  
Front  Yes  
Front & Rear  Yes  
Engage On-the-Go Rear Differential Lock  Yes  
Axle Type  Rack and pinion  
Brakes, Type and Control  Hydraulic wet disc  
Operator Station  
Rollover Protective Structure, OOS  N/A  
Rigid - Foldable - Telescopic  N/A  
Platform - Flat/Straddle  N/A  
Gearshift Location - Console/Floor  N/A  
Cab  ---  
Doors  ---  
Platform - Flat/Straddle  ---  
dB(A) Rating  69.8 - at no load in 6th gear with front wheel drive engaged  
Seat Suspension System  ---  
2WD Dimensions  
Wheelbase, in. (mm)  ---  
Front Tread Range, in. (mm)  ---  
Rear Tread Range, in. (mm)  ---  
Minimum Rear Tread Setting, in. (mm)  ---  
Front Axle Clearance, in. (mm)  ---  
Turning Radius w/Brakes, ft (m)  ---  
Turning Radius w/o Brakes, ft (m)  ---  
Unballasted Operating Weight, lb (kg)  ---  
Approx. Ship Wgt, lb (kg) Open; Cab  ---  
MFWD Dimensions  
Wheelbase, in. (mm)  2800 mm 
   110.2 in. 
Front Tread Range, in. (mm)  1524 to 2235 mm 
   60 to 88 in. 
Front Axle Clearance, in. (mm)  607 mm 
   23.9 in. 
Turning Radius w/Brakes, ft (m)  ---  
Turning Radius w/o Brakes, ft (m)  ---  
Limited Slip Differential  Yes  
Unballasted Operating Weight, lb (kg)  7801 kg 
   17,200 lb 
Approx. Ship Wgt, lb (kg) Open; Cab  7801 kg 
   17,200 lb 
4WD Dimensions  
Wheelbase, in. (mm)  N/A  
Wheel Tread, Min. to Max. in. (mm)  N/A  
Turning Radius w/o Brakes, ft (m)  N/A  
Nebraska Test Unballasted w/Duals, lb (kg)  N/A  
Unballasted Weight, lb (kg)  N/A  
Standard Tires  
2WD  ---  
Front  ---  
Rear  ---  
MFWD  ---  
Front  420/90R30  
Rear  480/80R46  
4WD  N/A  
Track widths  N/A  
Miscellaneous  
Country of Manufacture  Waterloo, Iowa, United States  
Ballasting Restrictions, lb (kg)  Refer to Operator's Manual  
*Notes  Updated - 28 March 2015