6155M for sale at Brazos Valley Equipment Co.. Your source for new and used equipment in Waco, Hillsboro, Cleburne, and Ennis Texas

CroppedImage660350-6155M.jpg

6155M

6M Row-Crop Tractors

  • Get a quote
    • Fields with asterisks* and highlighted red are required.

      Please email our helpful staff with any questions or comments using the contact form.

  • Send to a friend
    • Fields with asterisks* and highlighted red are required.

      Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.

  • 155-hp John Deere FT4 PowerTech™ engine
  • Available in cab or open-station configuration
  • 30-GPM pressure-flow compensated system
  • Choose from a range of available transmissions
Manufacturer John Deere
Model 6155M
Official Test  
Nebraska Test number  ---  
Engine  
Manufacturer  John Deere PowerTech™ PSS (B20 Diesel Compatible)  
Engine family  ---  
Aspiration  Dual Series Turbocharger w/fixed geometry first stage-variable geometry second stage - air-to-air aftercooling and cooled exhaust gas recirculation  
Cylinders/Displacement, cu. in. (L)  6/6.8 L 
   6/414 cu in. 
Cylinder Liners  Wet sleeve  
Fuel tank capacity, US Gal. (L) (Open; Cab)  ---  
Standard  295 L 
   78 U.S. gal. 
Optional  ---  
Underhood muffler  Yes  
Performance  
Advertised PTO hp (kW) @ Rated rpm  91 @ 2100 kW 
   123 @ 2100 hp 
Official PTO hp (kW) @ Rated rpm  ---  
@ Standard PTO @ Eng rpm  ---  
Maximum @ Eng rpm  ---  
Advertised Engine hp (kW) @ Rated speed  116 @ 2100 kW 
   155 @ 2100 hp 
Max Unballast Drwbr hp (kW) @ Eng rpm  ---  
Maximum Torque (PTO) @ rpm, lb-ft (Nm)  ---  
Max Torque Rise (80% rtd spd) @ Eng rpm  ---  
Maximum Torque Rise % (PTO) @ Eng rpm  ---  
Fuel Use, U.S. gal./hr & hp hr/gal. at:  
PTO @ Rated Eng rpm  ---  
Standard PTO Speed @ Eng speed  ---  
Maximum PTO Power @ Eng rpm  ---  
Maximum Engine Power @ Eng rpm  ---  
Max Unballasted Drawbar Power @ Eng rpm  ---  
75% Load, Full Engine rpm (Unballasted)  ---  
75% Load @ Reduced rpm (Unballasted)  ---  
Transmission  
Std. Transmission; Forward/Reverse  16 Speed PowrQuad Transmission 30K (OOS Only); 16 Speed PowrQuad PLUS™ Transmission 30K (Cab Only)  
Opt. Transmission; Forward/Reverse  20 Speed PowrQuad Transmission 40K (OOS Only);16 Speed PowrQuad PLUS™ Transmission 30K (Cab Only); 20 Speed PowrQuad PLUS Transmission 40K (Cab Only); 20 Speed AutoQuad PLUS™ Transmission 40K (Cab Only)  
Reverser  Left-hand base  
On-the-Go Shifting (Yes/No/Partial)  Yes  
Clutch; Wet/Dry  Wet  
Creeper  Yes  
Power Take-Off (PTO)  
Standard  Independent 1-3/8 in., 540/1000 reversible shaft  
Optional  Independent 540 rpm  
PTO Speeds @ Engine rpm  ---  
PTO Actuation  Electrohydraulic  
Hydraulics  
Type  Pressure & Flow Compensated (PFC) System with Load Sensing Function  
Pump Rated Output, GPM (L/min.)  ---  
Standard  114 L/min 
   30 gpm 
Optional  ---  
Rated Flow @ One SCV, GPM (L/min.)  ---  
Max Output @ SCV Couplers, GPM (L/min.)  ---  
Maximum Operating Pressure, psi (kPa)  20,000 kPa 
   2900 psi 
Maximum Hydraulic Power, hp (kW)  ---  
Hitch Draft Control Load Sense Type  Electrohydraulic  
Remote Control Valves Available  Up to 3 rear mechanical or 3 with power beyond, 3 mid-mount mechanical  
Hitch Category (SAE Designation)  Category 2/3N  
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt.  ---  
OECD  ---  
Standard  3719 Advertised kg 
   8198 Advertised lb 
Optional  4170 Advertised kg 
   9193 Advertised lb 
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt. (SAE)  ---  
Standard  ---  
Optional  ---  
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt. (ASAE)  ---  
Standard  ---  
Optional  ---  
Sensing type  Electronic lower link  
Joystick SCV control  Mechanical  
Final Drive  
Type  Inboard planetary three pinion  
Differential controls  Electrohydraulic  
Availability  ---  
Front  Yes  
Front & Rear  Yes  
Engage On-the-Go Rear Differential Lock  Yes  
Axle Type  Flanged axle, 8 position adjustable steel wheels - Base  
 Flanged axle with 2-Position Fixed Cast Wheels - Option  
 86 x 2550 with 2-Position Fixed Cast Wheels mm 
 3.385 x 100.4 with 2-Position Fixed Cast Wheels in. 
Brakes, Type and Control  Hydraulic wet disk  
Operator Station  
Rollover Protective Structure, OOS  Yes  
Rigid - Foldable - Telescopic  ---  
Platform - Flat/Straddle  ---  
Gearshift Location - Console/Floor  Transmission specific  
Cab  ---  
Doors  ---  
Platform - Flat/Straddle  ---  
dB(A) Rating  ---  
Seat Suspension System  ---  
2WD Dimensions  
Wheelbase, in. (mm)  2765 mm 
   108.9 in. 
Front Tread Range, in. (mm)  1610 to 2220 mm 
   63.3 to 87.4 in. 
Rear Tread Range, in. (mm)  ---  
Minimum Rear Tread Setting, in. (mm)  ---  
Front Axle Clearance, in. (mm)  ---  
Turning Radius w/Brakes, ft (m)  ---  
Turning Radius w/o Brakes, ft (m)  ---  
Unballasted Operating Weight, lb (kg)  ---  
Approx. Ship Wgt, lb (kg) Open; Cab  ---  
MFWD Dimensions  
Wheelbase, in. (mm)  2765 mm 
   108.9 in. 
Front Tread Range, in. (mm)  1494 to 2206 mm 
   58.8 to 86.8 in. 
Front Axle Clearance, in. (mm)  607 mm 
   23.9 in. 
Turning Radius w/Brakes, ft (m)  7.1 m 
   23.5 ft 
Turning Radius w/o Brakes, ft (m)  7.1 m 
   23.5 ft 
Limited Slip Differential  Yes  
Unballasted Operating Weight, lb (kg)  5930 kg 
   13073 lb 
Approx. Ship Wgt, lb (kg) Open; Cab  5930 kg 
   13073 lb 
4WD Dimensions  
Wheelbase, in. (mm)  ---  
Wheel Tread, Min. to Max. in. (mm)  ---  
Turning Radius w/o Brakes, ft (m)  ---  
Nebraska Test Unballasted w/Duals, lb (kg)  ---  
Unballasted Weight, lb (kg)  ---  
Standard Tires  
2WD  10.00-16 10PR F2 Bias - Front in. 
   460/85R38 149A8 R1W Radial - Rear in. 
Front  ---  
Rear  ---  
MFWD    
Front  380/85R28 133A8 R1W Radial in. 
Rear  460/85R38 149A8 R1W Radial in. 
4WD  ---  
Track widths  ---  
Miscellaneous  
Country of Manufacture  Mannheim, Germany  
Ballasting Restrictions, lb (kg)  Refer to Operator's Manual  
*Notes  Updated - 02/27/2015