5045E for sale at Brazos Valley Equipment Co.. Your source for new and used equipment in Waco, Hillsboro, Cleburne, and Ennis Texas

CroppedImage660350-E-Series-Tractors-5045E-2015.png

5045E

E Series Tractors

  • Get a quote
    • Fields with asterisks* and highlighted red are required.

      Please email our helpful staff with any questions or comments using the contact form.

  • Send to a friend
    • Fields with asterisks* and highlighted red are required.

      Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.

  • MFWD
  • 9F/3R transmission.
  • Open operator's station.
Manufacturer John Deere
Model 5045E (2015)
Official Test 
Nebraska Test number  Factory Observed  
Engine 
Manufacturer  John Deere PowerTech 3029  
Engine family  ---  
Aspiration  Turbocharged  
Cylinders/Displacement, cu. in. (L)  2.9 L 
 3/179 cu in.
Cylinder Liners  Wet Sleeved  
Fuel tank capacity, US Gal. (L) (Open; Cab)  ---  
Standard  68.0 L 
 18.0 U.S. gal.
Optional  ---  
Underhood muffler  Yes  
Performance 
Advertised PTO hp (kW) @ Rated rpm  27.3 @ 2100 per SAE kW 
 36.6 @ 2100 per SAE PTO hp
Official PTO hp (kW) @ Rated rpm  ---  
@ Standard PTO @ Eng rpm  ---  
Maximum @ Eng rpm
Advertised Engine hp (kW) @ Rated speed  27.3 @ 2100 kW 
 48 @ 2100 engine hp
Max Unballast Drwbr hp (kW) @ Eng rpm  ---  
Maximum Torque (PTO) @ rpm, lb-ft (Nm)  ---  
Max Torque Rise (80% rtd spd) @ Eng rpm  ---  
Maximum Torque Rise % (PTO) @ Eng rpm  ---  
Fuel Use, U.S. gal./hr & hp hr/gal. at: 
PTO @ Rated Eng rpm  ---  
Standard PTO Speed @ Eng speed  ---  
Maximum PTO Power @ Eng rpm  ---  
Maximum Engine Power @ Eng rpm  ---  
Max Unballasted Drawbar Power @ Eng rpm  ---  
75% Load, Full Engine rpm (Unballasted)  ---  
75% Load @ Reduced rpm (Unballasted)  ---  
Transmission 
Std. Transmission; Forward/Reverse  9F/3R SyncShuttle  
Opt. Transmission; Forward/Reverse  ---  
Reverser  No  
On-the-Go Shifting (Yes/No/Partial)  Partial  
Clutch; Wet/Dry  Dry  
Creeper  ---  
Power Take-Off (PTO) 
Standard  Independent 540  
Optional  ---  
PTO Speeds @ Engine rpm  540 @ 2400 rpm 
PTO Actuation  Mechanical (lever)  
Hydraulics 
Type  Open Center  
Pump Rated Output, GPM (L/min.)  ---  
Standard  68.9 L/min 
 18.2 gpm
Optional  ---  
Rated Flow @ One SCV, GPM (L/min.)  43.1 L/min 
 11.4 gpm
Max Output @ SCV Couplers, GPM (L/min.)  ---  
Maximum Operating Pressure, psi (kPa)  ---  
Maximum Hydraulic Power, hp (kW)  ---  
Hitch Draft Control Load Sense Type  Mechanical  
Remote Control Valves Available  1 (2 opt.)  
Hitch Category (SAE Designation)  2 ; convertible to 1  
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt.  ---  
OECD  ---  
Standard  ---  
Optional  ---  
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt. (SAE)  ---  
Standard  1448 kg 
 3192 lb
Optional  ---  
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt. (ASAE)  ---  
Standard  ---  
Optional  ---  
Sensing type  Top Link  
Joystick SCV control  2WD- FIK MFWD-Std  
Final Drive 
Type  Planetary  
Differential controls  Mechanical (Pedal)  
Availability  ---  
Front  No  
Front & Rear  No  
Engage On-the-Go Rear Differential Lock  Yes  
Axle Type  Flanged  
Brakes, Type and Control  Hydraulic Wet Disc  
Operator Station 
Rollover Protective Structure, OOS  ---  
Rigid - Foldable - Telescopic  Foldable, 2-Post  
Platform - Flat/Straddle  Straddle  
Gearshift Location - Console/Floor  Floor, on the side  
Cab  ---  
Doors  ---  
Platform - Flat/Straddle  ---  
dB(A) Rating  ---  
Seat Suspension System  ---  
2WD Dimensions 
Wheelbase, in. (mm)  2050 mm 
 80.7 in.
Front Tread Range, in. (mm)  ---  
Rear Tread Range, in. (mm)  ---  
Minimum Rear Tread Setting, in. (mm)  ---  
Front Axle Clearance, in. (mm)  ---  
Turning Radius w/Brakes, ft (m)  3.1 m 
 10.6 ft
Turning Radius w/o Brakes, ft (m)  2.94 m 
 11.6 ft
Unballasted Operating Weight, lb (kg)  ---  
Approx. Ship Wgt, lb (kg) Open; Cab  ---  
MFWD Dimensions 
Wheelbase, in. (mm)  2050 mm 
 80.7 in.
Front Tread Range, in. (mm)  ---  
Front Axle Clearance, in. (mm)  330 mm 
 13 in.
Turning Radius w/Brakes, ft (m)  2.94 m 
 11.6 ft
Turning Radius w/o Brakes, ft (m)  3.63 m 
 14.3 ft
Limited Slip Differential  ---  
Unballasted Operating Weight, lb (kg)  ---  
Approx. Ship Wgt, lb (kg) Open; Cab  2450 kg 
 5400 lb
4WD Dimensions 
Wheelbase, in. (mm)  ---  
Wheel Tread, Min. to Max. in. (mm)  ---  
Turning Radius w/o Brakes, ft (m)  ---  
Nebraska Test Unballasted w/Duals, lb (kg)  ---  
Unballasted Weight, lb (kg)  ---  
Standard Tires 
2WD  ---  
Front  7.5 - 16, R1  
Rear  13.6 - 28, R1  
MFWD  ---  
Front  9.5 - 24, R1  
Rear  13.6 - 28, R1  
 -------
Track widths  ---  
Miscellaneous 
Country of Manufacture  Pune, India  
Ballasting Restrictions, lb (kg)  ---  
*Notes  ---