388 for sale at Brazos Valley Equipment Co.. Your source for new and used equipment in Waco, Hillsboro, Cleburne, and Ennis Texas



Front-Mount and Rear-Mount Mower-Conditioners

  • Get a quote
    • Fields with asterisks* and highlighted red are required.

      Please email our helpful staff with any questions or comments using the contact form.

  • Send to a friend
    • Fields with asterisks* and highlighted red are required.

      Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.

388 Rear-Mount Mower-Conditioner is designed to cut and condition hay in tough field conditions such as wet, tangled hay, and fields with gopher mounds or anthills.

  • Adjust windrow width
  • Rotary disc cutterbar
  • Simple to operate platform controls
Manufacturer John Deere
Model 388 Twin Rear-Mounted Mower-Conditioner
PTO speed  1,000 rpm 
HP 540 rpm PTO  ---  
HP 1000 rpm 1-3/8 in. PTO  ---  
HP 1000 rpm 1-3/4 in. PTO  With 131 Front-Mounted Mower-Conditioner: 147 kW 
   190 hp 
Powerline type  ---  
Hydraulic pressure required  ---  
Type  Rotary  
Cutting width  With 131 Front Mounted Mower-Conditioner: 8.7 m 
   28.6 ft 
Cutting height  3-8 cm 
   1.2-3.2 in. 
Number of disks  8 per unit  
Number of knives  16 per unit  
Disk speed  2,986 rpm 
Knife tip speed  ---  
Disk drive  Gear  
Lubrication  GL-5 gear lubricant  
Oil reservoir capacity  2.25 L 
   0.59 U.S. gal. 
Cutterbar oil check  Fill plug  
Cutterbar angle  Adjustable  
Angle adjustment  Tractor center link  
Angle range  ---  
Cutterbar protection  Shear shaft  
Adjustable gauge shoes  ---  
Impeller  ---  
Width  264 cm 
   104 in. 
Diameter  ---  
Number of V-tines  54 per unit  
Number of speeds  Two  
Drive  Belt and sheaves  
Conditioner hood  Adjustable  
Rolls  ---  
Width  ---  
Diameter  ---  
Type of material  ---  
Design  ---  
Speed  ---  
Drive  ---  
Windrow width  ---  
Standard hitch  Tractor 3-point  
Ball joint equal angle hitch  ---  
Rockshaft swivel hitch  ---  
Drawbar swivel hitch  ---  
Overall width  ---  
Transport  3.1 m 
   10.1 ft 
With optional trailer  ---  
Overall length  ---  
Conventional transport  ---  
With optional trailer  ---  
Weight  ---  
With urethane roll conditioner  ---  
With V-10 steel roll conditioner  ---  
With tri-lobe steel roll conditioner  ---  
With impeller conditioner  2,986 kg 
   6,583 lb 
Standard tires  ---  
Are wrenches required for adjusting?  ---  
Float  Yes  
Skid shoes  ---  
Roll pressure  ---  
Roll spacing  ---  
Header tilt  ---  
Windrow width  ---  
Swathboard  ---  
Impeller conditioning hood  ---  
Date collected