8200 for sale at Brazos Valley Equipment Co.. Your source for new and used equipment in Waco, Hillsboro, Cleburne, and Ennis Texas

CroppedImage660350-8200.png

8200

8000 Series Self-Propelled Forage Harvesters

  • Get a quote
    • Fields with asterisks* and highlighted red are required.

      Please email our helpful staff with any questions or comments using the contact form.

  • Send to a friend
    • Fields with asterisks* and highlighted red are required.

      Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.

The new 8000 Series Self-Propelled Forage Harvesters have five all-new models, ranging from 375 to 616 horsepower, for season-long reliability, excellent cutting performance and more profitability.

  • 425 hp FT4 John Deere engine.
  • All-new design delivers improved serviceability with an integrated KP hoist, easy header hook-up and ground level fuel fill.
  • A best-in-class cab offers easier to use controls, better display access and visibility.
Manufacturer John Deere
Model 8200
Engine power  
Maximum power at 1800 rpm  ---  
Maximum power at 1900 rpm  317 kW  (431 PS / 425 hp)
Rated power at 2100 rpm  295 kW  (401 PS / 396 hp)
Fuel tank capacity  1100 L  (290.6 U.S. gal.)
Engine  
Manufacturer  John Deere  
Type  PowerTech™ PSS 9.0L  
   Exhaust emission regulation compliancy - Final Tier 4  
Model  Europe: 6090HZ014  
   North America: 6090HZ015  
Displacement  9 L (549 cu in.)
Cylinders  In line six  
Fuel system  Common rail plus four valves  
Cooling system  
Cooling system capacity  83 L (21.66 U.S. gal.)
Cooling fan drive  Direct  
Driveline  
Ground drive  Standard: Hydrostatic, 3-speed - manual shift with helical gears  
   Engine rpm on road: 1650 rpm 
   Optional: Prodrive™, autoshift transmission, differential lock (automatic and manual), automatic wet brake system  
   Engine rpm on road: 1650-2100 rpm 
Hydraulics  Load sensing  
Crop harvesting unit  Harvest channel standard  
Crop flow components  ---  
Main clutch  Dry clutch  
Number of discs  One disc  
Main driveband  Reinforced with Kevlar inserts  
Belt tensioning  Active, hydraulic pressure  
Main driveband, polybelt belts  Six belts  
Electrical system/Electrical and hydraulic system  
Type/voltage  12 V 
Batteries/battery quantity/capacity  1 x 174 amp-hr 
Alternator  200 amp 
Hydraulic system capacity  50 L (13.2 U.S. gal.)
Ground drive  
Type  Standard: hydrostatic, 3-speed manual shift  
   Optional: Prodrive™, autoshift transmission  
Differential lock  Manual or automatic (optional comes with ProDrive)  
Maximum transport speed  Hydrostatic transmission: 30 km/h (18.6 mph)
   ProDrive transmission: 40 km/h (24.9 mph)
Rear axle type  Hydro-mechanical 4WD  
Automatic wet brake system  Available with ProDrive transmission  
Engine rpm - Management  Optional  
Cab  
Tilt and extend steering column  Standard  
Air conditioning and heater  Standard - ClimaTrak  
Cool box  Optional  
Trainee seat  Standard  
Hectare counter  Standard  
Operator information system  Cornerpost display  
CAN-BUS electronics  Standard  
Operator's seat  Air-suspension seat standard  
Side window wiper  Rear and side window wiper optional  
   Parallel-type windscreen wiper  
Electric adjust and heated  Optional on rear view mirrors  
Rear view mirrors  Standard  
Machine management solutions  
Yield monitoring  Harvest Monitor™ optional  
Documentation  Harvest Doc™ optional  
Crop analysis  HarvestLab™ optional  
Length-of-cut control based on crop parameter  Infinitely variable length-of-cut (IVLOC™) standard  
   AutoLOC™ optional - use with HarvestLab  
Satellite (GPS) assisted steering  AutoTrac™ optional  
Crop-harvesting units  
Header height control  Advanced header control (AHC) optional  
Grass pick-ups  3.0, 4.0, 4.5 m (9.8, 13.1, 14.8 ft)
   
Maize or corn headers  --  
Harvest channel  
Width  ---  
Length of cut  
Range  40 knives: 7-26 mm (0.275-1.0 in.) LOC / 1 mm (0.04 in.) steps  
   48 knives: 6-22 mm (0.24-0.87 in.) LOC / 1 mm (0.04 in.) steps  
Feeding system/Feedrolls  
Feed roll frame opening  Swing away, 37-45 degree (angle) 
Number  Four  
Metal detector  Standard  
   Stone detector is optional  
Width, front  660 mm (26 in.)
Standard feed roll drive  Hydro feedroll drive IVLOC standard  
   Infinitely header drive speed standard  
Optional feed roll drive  ---  
Cutterhead  
Type  Dura-Drum™ cutterhead  
Knife drum width  680 mm (26.8 in.)
Knife drum diameter  678/668 mm (26.7/26.3 in.)
Speed at rated engine speed  1100 rpm 
Knife types available (crop)  Straight - grass  
   Curved - corn  
Number of knives  40 or 48  
Knife sharpening system  
Reverse rotation  Yes  
Automatic from cab  Yes, remote from cab  
Reverse drive  Standard  
Reverse speed  ---  
Kernel processor  
Type  Serrated roller  
Quick-change  Quick kernel processor - swing in/swing out  
Serrated roller (kernel processor)  
Maize, roll teeth number (speed differential)  118 - 24 or 32 percent 
Wholecrop, roll teeth number (speed differential)  178 - 32 percent 
Sorghum, roll teeth number (speed differential)  238 - 32 percent 
Weight  145 kg  (320 lb)
Disk type (kernel processor)  
Number of disks (top/bottom)  15/14 plus 2-1/2  
Diameter of disks  240 mm (9.45 in.)
Weight  172.41 lb (380 kg)
Blower/Crop accelerator  
Number of blades  10  
Spout  
Rotation, degrees  210 degree (angle) 
Hydraulic height position  Hydraulic raise and lower standard  
   Automatic spout positioning optional  
Double-cap deflection  Standard  
Number of wear liners  ---  
Maintenance  
Rotary radiator screen cleaner  Standard  
Automatic lubrication system  Optional  
Engine oil and filter change duration  JD+50™ II oil: 500 hours  
   Other oil: 250 hours  
Vehicle  
With front tires  710/70R42  
With rear tires  620/60R30  
Transport length (without header)  6.5 m (21.4 ft)
Transport width (without header)  3-3.5 m (9.84-11.5 ft)
Transport height (to cab roof)  3.89 m (12.75 ft)
Working height (maximum)  Height to spout: 6.60 m (21.65 ft)
Approximate weight (without header)  ---  
Propelling drive  
Standard  Hydrostatic, 3-speed - manual shift with helical gears  
Transmission  
Type  Standard: Hydrostatic, 3-speed - manual shift with helical gears  
   Hydro-mechanical rear axle optional