635D Draper for sale at Brazos Valley Equipment Co.. Your source for new and used equipment in Waco, Hillsboro, Cleburne, and Ennis Texas

CroppedImage660350-JohnDeere-635D.jpg

635D Draper

600D Draper Platforms

  • Get a quote
    • Fields with asterisks* and highlighted red are required.

      Please email our helpful staff with any questions or comments using the contact form.

  • Send to a friend
    • Fields with asterisks* and highlighted red are required.

      Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.

  • Windrowing capability with 600D Drapers
  • Double-cut knife system produces a cleaner cut
  • Cutterbar is closer to the ground
  • Stainless-steel feed floor
Manufacturer John Deere
Model 635D
Cutterbar  
Type  Straight line knife drive system  
Length  10.8 m 
   35.5 ft 
Knife drive  Dual knife base  
Knife speed  520 cycles/min 
Cutterbar tilt  Base hydraulic, 9 degrees tilt maximum  
Pickup reel  
Number of slats  6 bat poly base  
Fingers  Nylon  
Diameter  1,067 mm 
   42 in. 
Height control  Hydraulic  
Speed control  Hydraulic  
Reel lift  Cylinder stroke 330 mm 
   13 in. 
   Total range 391.5 mm 
   15.4 in. 
Reel fore and aft  Cylinder stroke 359 mm 
   14.1 in. 
   Total range 620 mm 
   24.4 in. 
Reel resume  Base  
Reel reverse  Base  
Operating speeds  6-54 rpm 
Operating speeds (54-in. reel)  ---  
Slat reel  
Number of slats  ---  
Diameter  ---  
Height control  ---  
Speed control  ---  
Operating speeds  ---  
Draper belts  
Width  Side belts 1,016 mm 
   40 in. 
   Center belts 1,397 mm 
   55 in. 
   Center belt not included with SPW configuration  
Clean height  Cleats 25.4 mm 
   1 in. 
Operating speed  Side belts; variable up to 223 m/min 
   735 fpm 
   Center belts 212 m/min 
   695 fpm 
   Center belt not included with SPW configuration  
Speed control  Hydraulic from cab  
Center belt reverse  Base; Center belt not included with SPW configuration  
Feed drum  
Diameter  406 mm 
   16 in. 
   Feed drum not included with SPW configuration  
Feed drum fingers  Heavy-duty round 16 mm (0.625 in) diameter with breakaway notch and retainer  
Number of fingers  18  
Auger finger platform  Dual chevron, retracting  
Finger reach  152 mm 
   6 in. 
Drum/auger reverse  Base  
Operating speed  195 rpm 
Center clean out door  Base  
Header height sensing  
Type  Electro-hydraulic, base  
Header height sensing on the ground  Base  
Header height sensing off the ground  Base  
Auxiliary top auger  
Type  Optional, hydraulic drive  
Dimensions  
Platform length  11.6 m 
   37.9 ft 
Overall operating depth  2.5 m 
   8.2 ft 
Transport width, field position  11.4 m 
   37.5 ft 
Transport width on wheel, less dividers  2.7 m 
   8.9 ft 
Transport length, hitch extended  13.8 m 
   45.4 ft 
Weight  
Approximate weight (slat reel)  ---  
Approximate weight (pickup reel)  Combine only 3,514 kg 
   7,746 lb 
   SPW only 2,914 kg 
   6,423 lb 
Approximate weight (with transport)  Combine only 3,690 kg 
   8,136 lb 
   SPW only 3,091 kg 
   6,813 lb 
Approximate weight (optional 54-in. reel)  ---