640D Draper for sale at Brazos Valley Equipment Co.. Your source for new and used equipment in Waco, Hillsboro, Cleburne, and Ennis Texas

CroppedImage660350-JohnDeere-640D.jpg

640D Draper

600D Draper Platforms

  • Get a quote
    • Fields with asterisks* and highlighted red are required.

      Please email our helpful staff with any questions or comments using the contact form.

  • Send to a friend
    • Fields with asterisks* and highlighted red are required.

      Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.

  • Windrowing capability with 600D Drapers
  • Dual-knife drive system is timed
  • Cutterbar is closer to the ground
  • Conveniently store optional spare knives
Manufacturer John Deere
Model 640D
Cutterbar  
Type  Straight line knife drive system  
Length  12.3 m  (40.5 ft)
Knife drive  Dual knife base  
Knife speed  520 cycles/min 
Cutterbar tilt  Base hydraulic 9 degrees tilt maximum  
Pickup reel  
Number of slats  6 bat poly base  
Fingers  Nylon  
Diameter  1,067 mm (42 in.)
Height control  Hydraulic  
Speed control  Hydraulic  
Reel lift  Cylinder stroke 330 mm (13 in.)
   Total range 391.5 mm  (15.4 in.)
Reel fore and aft  Cylinder stroke 359 mm (14.1 in.)
   Total range 620 mm (24.4 in.)
Reel resume  Base  
Reel reverse  Base  
Operating speeds  6-54 rpm 
Operating speeds (54-in. reel)  ---  
Slat reel  
Number of slats  ---  
Diameter  ---  
Height control  ---  
Speed control  ---  
Operating speeds  ---  
Draper belts  
Width  Side belts 1,016 mm  (40 in.)
   Center belts 1,397 mm  (55 in.)
   Center belt not included with SPW configuration  
Clean height  Cleats 25.4 mm  (1 in.)
Operating speed  Side belts: variable up to 223 m/min (735 fpm)
   Center belts 212 m/min  (695 fpm)
   Center belt not included with SPW configuration  
Speed control  Hydraulic from cab  
Center belt reverse  Base; Center belt not included with SPW configuration  
Feed drum  
Diameter  406 mm (16 in.)
   Feed drum not included with SPW configuration  
Feed drum fingers  Heavy-duty round 16 mm (0.625 in) diameter with breakaway notch and retainer  
Number of fingers  18  
Auger finger platform  Dual chevron, retracting  
Finger reach  152 mm (6 in.)
Drum/auger reverse  Base  
Operating speed  196 rpm 
Center clean out door  Base  
Header height sensing  
Type  Electro-hydraulic base  
Header height sensing on the ground  Base  
Header height sensing off the ground  Base  
Auxiliary top auger  
Type  Hydraulic drive, optional  
Dimensions  
Platform length  13.1 m (42.9 ft)
Overall operating depth  2.5 m  (8.2 ft)
Transport width, field position  12.95 m  (42.5 ft)
Transport width on wheel, less dividers  2.7 m  (8.9 ft)
Transport length, hitch extended  15.4 m (50.4 ft)
Weight  
Approximate weight (slat reel)  ---  
Approximate weight (pickup reel)  ---  
Approximate weight (with transport)  Combine only 3,967 kg (8,746 lb)
   SPW only 3,367 kg (7,423 lb)
Approximate weight (optional 54-in. reel)  ---