HX20 for sale at Brazos Valley Equipment Co.. Your source for new and used equipment in Waco, Hillsboro, Cleburne, and Ennis Texas

CroppedImage660350-HX20.jpg

HX20

Heavy-Duty and Commercial Rotary Cutters

  • Get a quote
    • Fields with asterisks* and highlighted red are required.

      Please email our helpful staff with any questions or comments using the contact form.

  • Send to a friend
    • Fields with asterisks* and highlighted red are required.

      Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.

  • Superior four-gearcase design
  • Gearcases and blade holders for better performance
  • Domed shape and smooth top deck is easy to clean
  • Safety tow chains for extra support

 

Manufacturer John Deere
Model HX20
Capacity  
Cutting width  6,096 mm 
 240 in. 
Cutting height  For clearance over terraces 25 to 406 mm 
 1 to 16 in. 
Cutting capacity (diameter)  76.2 mm 
 3 in. 
Cutting chamber depth  267 mm 
 10.5 in. 
Tractor compatibility  
Tractor PTO HP range  56 kW 
 75 hp 
Tractor PTO  540 or 1,000 rpm 
Static Vert Drawbar Load Rating  1,165 kg 
 2,560 lb 
Hitch  
Type  Pull-type, with standard self-leveling hitch clevis (Pull-Type has standard 10,000 lb, 4,536 kg, Safety Tow Chain)  
Category  ---  
Hitch width  For tight turn capability 570 mm 
 22.5 in. 
Jackstand  Stays vertical while raising/lowering  
Dimensions  
Transport width  3,400 mm 
 134 in. 
Overall width  6,250 mm 
 246 in. 
Overall length  5,760 mm 
 227 in. 
Deck shape  Easy-clean, dome-shaped top deck  
Deck type  Double-decker design for superior strength  
Deck thickness  ---  
Upper  3 (11) mm  
.118 (11) in. 
Lower  3.5 (10) mm  
.138 (10) in. 
Shirt thickness  6 mm 
 .25 in. 
Hinges  Intermittent cast steel segments - greaseable; single 1-in. (2.5-cm) diameter full-length hinge pin  
Approx. weight  3,050 kg 
 6,710 lb 
Drivelines  
Size  ---  
Main  CV ASAE Category 5 splined telescoping profiles  
Connecting  ASAE Category 4 splined telescoping profiles  
Protection  ---  
Main  No-seize, slip-clutch driveline  
Connecting  No-seize, slip-clutch driveline  
Gearcases  
Number  4  
HP rating  ---  
Transfer  186 continuous / 224 peak kW 
 250 continuous / 300 peak hp 
Center  112 continuous / 153 peak kW 
 150 continuous / 205 peak hp 
Outer  112 continuous / 153 peak kW 
 150 continuous / 205 peak hp 
Blades  
Thickness  13 mm  
 .5 in. 
Width  102 mm 
 4 in. 
Type  Suction, dual suction  
Overlap  152 mm 
 6 in. 
Blade rotation  CW, CCW, CCW  
Blade tip speed  ---  
540 RPM  Wing 4,903 (295 km/h) m/min 
 16,087 (183 mph) fpm 
 Center 4,914 (295 km/h) m/min 
 16,122 (183 mph) fpm 
1000 RPM  Wing 4,988 (299 km/h) m/min 
 16,364 (186 mph) fpm 
 Center 4,974 (298 km/h) m/min 
 16,319 (185 mph) fpm 
Material flow system  Smooth, obstruction-free Max Flow cutting chamber for a clean cut and no windrows  
Blade holder  ---  
Diameter  ---  
Type  Bar or stump jumper for protection of blades and carrier against obstruction damage  
Hydraulics  
Wing lift  Standard, includes spring-assist unfolding  
Wing flex, degrees  90 up, 22 down degree (angle) 
Wheels  
Type  ---  
Option 1  ---  
Option 2  4-bolt 21x7x12 16 PR Severe-Duty Ag Tires  
Suspension  Spring suspension on all 4 wheels standard  
Row width adjustment  Yes  
Wing-leveling adjustment  Easy-adjust turnbuckle with bearing  
Shielding  
Front  Chain  
Rear  Chain  
Warranty  
Gearboxes  5 years